Accessories

Images Product # Description Product Features
383808-A4 Thermo-Aire Heater Kit - 115 VAC
  • Used to heat incoming air for misting of high-viscosity oils that do not mist at ambient temperature (viscosities between 1,000 to 6,000 SSU @ 110°F
  • Unit can also be used to increase and stabilize the air/oil ratio of all oils under varying ambient temperatures
  • Use with medium-output generators only
  • 115 VAC
  • 60 Hz
  • 600 W
383808-B4 Thermo-Aire Heater Kit - 230 VAC (B4)
  • Used to heat incoming air for misting of high-viscosity oils that do not mist at ambient temperature (viscosities between 1,000 to 6,000 SSU @ 110°F
  • Unit can also be used to increase and stabilize the air/oil ratio of all oils under varying ambient temperatures
  • Use with medium-output generators only
  • 230 VAC
  • 50 Hz
  • 600 W
387596 Mist Monitor
  • Fiber-optic sensor is designed to continuously monitor the established output of the oil mist generator
  • Sensor responds to changes in air/oil ratio of mist passing through the manifold
  • Unit will provide an Electronic Control Cabinet if the mist density falls below preset limits
  • Included items: Junction Box, Fiber-Optic Cables, Mist Manifold
385033 Mist Pressure Switch
  • Safety switch used to respond to drop or rise of oil mist line pressure
  • Can be used to energize a warning signal during machine operation
  • May also be used to prevent machine startup when manifold pressure is not within accepted limits
  • Range of adjustments: .03 psi (0.8” H2O) to 3.0 psi (83” H2O)
  • Factory set operating parameters: 8” H2O on falling pressure; 55” H2O on rising pressure
  • Contact rating: 10 Ampere@115 VAC and 230 VAC
385662 Sight Assembly with bleed hole
  • Permits visual inspection of condensed oil after passing through a bearing housing
  • Snap Valve for manual draining included
  • Includes a bleed hole to prevent oil from backing up into bearing cavity
  • Used with a dry sump
  • Constructed of sturdy transparent acrylic
  • Installed in the drain hole commonly provided at the bottom of a bearing housing
  • Connection: 1/2” NPT(m)
385662-A1 Sight Assembly without bleed hole
  • Permits visual inspection of condensed oil after passing through a bearing housing
  • Snap valve for manual draining included
  • Includes a bleed hole to prevent oil from backing up into bearing cavity
  • Used with a dry sump
  • Constructed of sturdy transparent acrylic
  • Installed in the drain hole commonly provided at the bottom of a bearing housing
  • Connection: 1/2” NPT(m)
380696 Reservoir Refill Hose Assembly
  • 7’ long, 3/8” ID hose assembly with 40 micron filter
  • Loader coupler assembly
  • Connect directly to pump (7181-4)
387335 Air Filter/Regulator with Gauge
  • Removes water and particles from incoming air supply
  • Controls system pressure
  • 5-micron element
  • Automatic drain
  • 1/4” NPT(f) ports
  • Max inlet pressure: 150 psi
  • Max outlet pressure: 60 psi (4bar)
387344 Mounting Bracket
  • Easy to install
  • Provides convenient mounting of bare pint units 3922-A and 3922-B
383647-1 Solenoid Valve for Auto Refill.
  • Helps control refills of oil mist units
387449-1/387449 Air Solenoid Valve (120 VAC/230 VAC)
  • 1/4” NPT(f) ports
  • 1/2” NPT(f) conduit connection
387387 Brush Brush, 1-1/2”, 1/4” PTF(f)
387386 Brush Brush, 5/8”, 1/4” PTF(f)
387388 Brush Flat Brush, 2-14”, 1/4” PTF(f)
387275 Alarm Annunciator - 120 VAC
  • Provides visual and audible warning of system fault conditions, including: low oil level, high mist pressure, low mist pressure, low air temperature
  • Selector switch can be used to disable the horn during trouble shooting of the system fault
  • Horn also features volume control
  • Dry contacts included to energize a remote alarm ( max. rating of 10 Ampere @120/220 VAC)
  • Contact rating: 10 Amperes@115 VAC and 230 VAC
387323 Oil Heater - 120 VAC
  • For gallon units
  • 120 VAC
  • Maintains oil at 100°F (38° C)
  • 100 Watt
  • Recommended for outdoor installations or when the ambient temperature may drop below 70°F(21°C)
387323-A Oil Heater - 220 VAC
  • For gallon units
  • 220 VAC
  • Maintains oil at 100°F (38° C)
  • 100 Watt
  • Recommended for outdoor installations or when the ambient temperature may drop below 70°F(21°C)
385787 Automatic Reservoir Filler for 110 VAC Modular Style Generators
  • Eliminates transporting oil
  • Generators refilled automatically according to need
  • Oil level is constantly maintained
  • Eliminates spills
  • Prevents contaminated oil from entering system REQUIRED

ACCESSORIES: 110 VAC Solenoid Valve (383647-1); 325738 pump package

385789 Automatic Reservoir Filler for 220 VAC Modular Style Generators
  • Eliminates transporting oil
  • Generators refilled automatically according to need
  • Oil level is constantly maintained
  • Eliminates spills
  • Prevents contaminated oil from entering system

REQUIRED ACCESSORIES: 230 VAC Solenoid Valve (383647); 325738 pump package