An Alemite Injector System is an automated system that provides precise lubrication and offers a wide range of lubrication adjustment. Our injector systems offer a great deal of application flexibility so you can add or remove lubrication points without having to redesign the system.

Instructions

Mouse-over the components to see a description.

Filter/Regulator/Lubricator: (339934)

Cleans and dries air before it goes to the pump to prevent dirty, humid air from stalling pump.

Recommended accessories:

Gauge (0-160 psi) (339948)
Bracket (339925)

3-Way Solenoid Valve

Start/stops air flow to the pump.

110 Volt AC (387449-2)
24 Volt DC (387449-3)
220 VAC (387449-4)

CLS1000 Controller (387780)

The centerpiece of any central lube system - allows users to set timing or machine strokes for lube cycles; features an alarm circuit for remote alarm or function

(Refer to service sheet 670864 for specifications and technical data)

Pump

Grease
• 35 lb. (339359-A1); Cover (338166); Follower (337665)
• 120 lb. (339359-B1); Cover (338371); Follower (338802)
• 400 lb. (339359-C1); Cover (318040-4); Follower (338911)

Oil
• 5 gallon (331571-C5); Cover (338166)
• 16 gallon (331571-A5); Cover (338371)
• 55 gallon (331571-B5); Cover (318040-4)

Filter (Grease or Oil)

149 micron grease (715495)
25 micron oil (715255)
10 micron oil (715105)
3 micron oil (715035)

Pressure Vent Valve (382600)

Relieves pressure in the main line to allow injectors to reset for next lubrication cycle.

Injectors (Oil or Grease)

AL-32 (grease) (.001-.008 cu. in.)
AL-43 (oil) (.001-.008 cu. in.)
AL-1 (grease) (.008-080 cu. in.)
AL-11 (grease) (.050-.500 cu.in.)

Pressure Switch (340098)

Sends lube cycle complete to controller, shutting off air to the pump. Adjustable 280 psi (19 bar) to 3,000 psi (207) bar 115 VAC, 7.5 amp max. load.

note: use if 387800 is not used